HIGHSIDER pro steel handlebars in 1-inch with H-D bead

HIGHSIDER pro stands for outstanding handlebar quality. Of course, this also applies to the wide and heavy versions of the inch handlebars.

The HIGHSIDER pro handlebars are made of high-quality steel with a large wall thickness and are characterized by their exceptional rigidity and reduced tendency to vibrate.

In addition to the classic shapes, HIGHSIDER pro also offers sporty handlebar variants in 25.4 mm.

With a continuous outer diameter of 25.4 mm, the wall thickness of the handlebars is 3 mm (19.4 mm inside). The surface is high-gloss polished and chrome-plated, or black KTL-coated.

The handlebars are supplied without holes for the anti-rotation protection of the switch fittings. We recommend using the HIGHSIDER pro drilling template in order to adopt the position of the holes from the standard handlebars as best as possible.

For use on Harley models, a version with a recessed cut-out for cable routing (H-D surround) is available.

All HIGHSIDER pro handlebars are supplied with ABE.
The range of models is huge and is expanded every year with new entries.
The ABE reliably documents which handlebar type fits and is approved for the motorcycle.

As a rule, the assignments in the ABE are without conditions.
However, there are also exceptions.
So take a look at the entry for your motorcycle in the ABE.
If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.

Scope of delivery: 1 piece

Care instructions:
- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!
- Never use in direct sunlight and do not allow the cleaner to dry out.
- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc. immediately absorb any dripping with a soft cloth.
- Test the compatibility of cleaning agents on an inconspicuous area before use!
- No guarantee or warranty in the event of improper cleaning and care.